Wireless-G PrintServer for USB 2.0
The Wireless Tab - Basic
This screen allows you to change the PrintServer's basic wireless settings.
Configuration. From the Regulatory Domain drop-down menu, select the name of your geographic region. The
PrintServer's MAC Address is listed and cannot be changed. In the SSID field, enter the name of your wireless
network. This is the unique name shared by all devices in a wireless network. The SSID is case-sensitive and
should have 32 characters or fewer.
If your network is set to ad-hoc mode, select your network's channel setting from the Channel No. drop-down
menu.
Figure 6-7: Wireless Tab - Basic
The Network Type setting shows a choice of two wireless modes. Select Infrastructure if you want the
PrintServer to communicate using an access point or wireless router. Select Ad-Hoc if you want the PrintServer
to communicate without using an access point or wireless router.
Click the Save button to apply your changes, or click Cancel to cancel your changes.
Chapter 6: Configuring the PrintServer Using the Web-based Utility
22
The Wireless Tab - Basic