Figure 4-3: Setup Wizard's Wireless Network Screen; Figure 4-4: Setup Wizard's Wireless Mode Screen - Linksys WMP55AG User Manual

Dual-Band Wireless A+G PCI Adapter
3. The Setup Wizard will ask you to choose a network type. Click the 5GHz or 2.4GHz radio button if you will
connect to 802.11a networks, as well as 802.11g and/or 802.11b networks. Click the 5GHz only radio button
if you will connect only to 802.11a networks. Click the 2.4GHz only radio button if you will connect only to
802.11g and/or 802.11b networks.
Click the Next button.
4. The Setup Wizard will ask you to choose a network mode. Click the Infrastructure Mode radio button if you
want your wireless computers to network with computers on your wired network using a wireless access
point. Click the Ad-Hoc Mode radio button if you want multiple wireless computers to network directly with
each other.
In the SSID field, enter the SSID of your wireless network. The SSID must be identical for all devices in the
network. The default setting is linksys (all lowercase). Click the Next button.
NOTE: An SSID is the network name shared by all devices in a wireless
network. Your network's SSID should be unique to your network and identical
for all devices within the network.
Chapter 4: Setting up the Dual-Band Wireless A+G PCI Adapter
Using the Setup Wizard

Figure 4-3: Setup Wizard's Wireless Network Screen

Figure 4-4: Setup Wizard's Wireless Mode Screen

8