NETGEAR XAV2602 Installation Manual page 9

The Powerline LED turns on for each Powerline adapter when they
detect each other. The devices automatically form a Powerline
network.
Add the adapter to a secure Powerline network:
Your Powerline network is already secured if you used the Security
button or the Powerline Utility to set up security.
1. Make sure that the Powerline devices you already use are
compatible to the XAV2602. Plug the XAV2602 into another
electrical outlet.
2. Press the Security button on one of your existing Powerline
adapters for 2 seconds and release the button. Then within 2
minutes, press the Security button on the XAV2602 for 2 seconds
and release the button. The Power LED on the XAV2602 starts to
blink as security is setting up.
The Powerline LED turns on for each Powerline adapter when
they detect each other. They automatically form a Powerline
network.
3. Use Ethernet cables (one is included in the package) to connect
your equipment to the Ethernet ports on the adapter.
• Port 1 is for high-priority traffic used by devices such as
gaming consoles.
• Port 2 is for devices with lower-priority traffic.
You can use both ports or only one port.
9