Hitachi 42V710 Operating Manual page 52

Chan.
Manager
Select Channel Manager to set your Antenna options, run Auto Channel Scan, Check Signal Meter and Set Channel
List.
Video
Audio
Aspect
Chan. Manager
Locks
Timers
Setup
Move Sel
SEL
Press CURSOR PAD , to highlight function, the press the SELECT button to select.
Set The Antenna
This feature will select Antenna options.
Chan. Manager
Set The Antenna
Auto Chan. Scan
Signal Meter
Channel List
Return
Move
SEL
Press CURSOR PAD , to highlight function, the press the SELECT button to select.
NOTE: When a CableCARD is installed, antenna settings will be set automatically to "Connect Cable to Ant A only".
Auto Channel Scan
Chan. Manager
Set The Antenna
Auto Chan. Scan
Signal Meter
Channel List
Move Return
SEL
Press CURSOR PAD , ,
Press CURSOR PAD , to highlight the Start or Clear option.
Press the SELECT button to select.
NOTE:
When a CableCARD is installed, Auto Channel Scan will not be available.
This feature will automatically store active TV channels in Auto Channel Scan memory.
, to highlight Ant A or Ant B.
CHANNEL MANAGER
Chan. Manager
Set The Antenna
Auto Chan. Scan
Signal Meter
Channel List
Move Return
SEL
Chan. Manager
Set The Antenna
( ) Connect Cable to Ant A and
Air to Ant B
( ) Connect Cable to Ant A only
( ) Connect Air to Ant A only
Cable Source
Cable(1)
Return
Move
SEL
Chan. Manager
Auto Chan. Scan
Ant A
Auto Channel Scan
Ant B
Auto Channel Scan
Move Return
SEL
52
Cable(2)
Start Reset
Start Reset