Cisco Linksys WMA11B User Manual page 12

8. The Wireless Security Settings screen, shown in Figure 5-7, appears next. If
you want to enable WEP encryption for greater wireless security, select the
level of WEP encryption, 64-bit or 128-bit, and then enter a Passphrase. If
you want to enter the WEP key manually, then complete the KEY #1 field.
If you want to disable WEP encryption, keep the default, Disabled. Click
the Next button to continue.
Passphrase - Instead of manually entering a WEP key, you can enter a
Passphrase, so a WEP key will be automatically generated after you click
the Next button. The Passphrase is case-sensitive and should have 16
alphanumeric characters or fewer. It must match the passphrase of your
wireless network and is compatible with Linksys wireless products only.
(You will have to enter the WEP key(s) manually on any non-Linksys wire-
less products.)
KEY #1 - If you are using 64-bit WEP encryption, then the key must con-
sist of exactly 10 hexadecimal characters. If you are using 128-bit WEP
encryption, then the key must consist of exactly 26 hexadecimal characters.
Valid hexadecimal characters are "0"-"9" and "A"-"F".
16
Figure 5-7
9 . Review your settings on the screen shown in Figure 5-8, before the Setup
Wizard starts to copy your files. Click the Save button to continue.
Figure 5-8
11. After the files have been successfully copied, the screen in Figure 5-9 will
appear. Click the Install Utility on PC button to install the Adapter's Utility
on your PC. This Utility will enable your PC to send digital images and
music files to the Adapter. Click the Exit button if you want to install the
Adapter's Utility later.
Figure 5-9
Proceed to "Chapter 6: Installing and Using the Wireless-B Media
Adapter Utility."
17