Bluetooth Unit Control (Hands-Free Phone) - Panasonic CQ-VW100W System Upgrade Manualbook

Bluetooth Unit Control (Hands-free Phone)

Preparation:
¡Connect the Bluetooth Unit (CY-BT200N, option).
Bluetooth Hands-free Phone Mode Selection
17
Telephone picking up
Press [Hang-on] of the Bluetooth unit (CY-BT200N)
when receiving a telephone call. (Registration of your
mobile phone in advance is required.)
Note:
¡ Even pressing [Hang-up] provides the state of pick-
ing up the phone during a call incoming for some
mobile phone models.
Source selection
q Touch "Source Button".
d
Press [SRC/PWR] to change to the desired
mode.
d
e Touch
To switch Operation Screen ON, touch the center of
touch panel.
Note:
¡ To have a mobile phone conversation with use of this unit, the mobile phone shall be compatible with the Hands-Free
Profile.
¡ Refer to the operating instructions of the Bluetooth unit (CY-BT200N) for further information regarding Bluetooth.
¡ We shall not guarantee all the functions of the Bluetooth-ready mobile phone to be connected.
Bluetooth Hands-free Phone Settings
Operations
Registration of the
Bluetooth-ready mobile
phone with this unit
Touching calls the last screen.
18
CQ-VW100W
w Touch
(Bluetooth) on
the Source
Selection Screen.
(Content varies with
connected devices)
.
d
d
–
Source Button
MUTE VOL DIMMER
[SRC/PWR]
Calling method selection button
Switch unit of CY-BT200N
q The setup screen appears.
–
w The registration screen appears.
–
e Set up the Bluetooth compatible devices to be regis-
–
tered with this unit. (Touching
istration.)
Phone number
Call/End button
CQ-VW100W
Disconnect
button
Bluetooth
SRC / PWR SRC / PWR MAP TUNE/TRCK TILT setting but-
ton
[Hang-on]
[Hang-up]
d
d
stops reg-