Surround Sound; Digital Audio Output - Haier LE32D2320 User Manual

[ENTER] to enter the sub-menu
and press[VOL-] or [VOL+] to
adjust.
[User] – Allow you to store your
preferred settings.
[Standard] – Select for standard
sound settings. Recommended for
home entertainment.
[Soft] – Select for soft sound
settings.
[Dynamic] – Select for dynamic
sound settings.
Note: Changing the settings
below will automatically
change the Sound Mode to
User.
2. Balance: Adjust the level of sound
coming from the left and right
speakers. Press [VOL-] to shift the
balance and emphasize the left
speaker. Press [VOL+] to shift the
balance and emphasize the right
speaker.
3. Bass:Adjust the low frequency
sounds.Press [VOL-] to decrease
bass. Press [VOL+] to increase the
bass.
4. Treble: Adjust the high frequency
sounds.Press [VOL-] to decrease
treble. Press [VOL+] to increase
the treble.

5. Surround Sound:

[Off ] – Set surround sound off.
[On] – Set surround sound on.

6. Digital Audio Output:

[Off ] – Set the audio output type
of coax or optical terminal off.
[RAW] – Output the original
format of the audio stream.
[PCM] – PCM can be matched
with most AV amplifiers.
Auto Volume Control
Video
Audio
TV
Setup
Parental
1. Auto Volume Control : Use
the [CH-] or [CH+] buttons to
highlight one of the following
options, then press [ENTER]
to enter the sub-menu and
press[VOL-] or [VOL+] to adjust.
[Off ] – Set the auto volume
control off.
[On] – Set the auto volume
control on.
TV
Signal Type
Video
Auto Channel Search
Audio
Channel Skip
Favorite list
TV
Setup
Parental
1. Signal Type : Use the [CH-] or
[CH+] buttons to highlight one of
the following options, then press
[ENTER] to enter the sub-menu
and press[VOL-] or [VOL+] to
adjust.
[Antenna] – Set the signal type
to antenna. When set to Air, the
TV can receive analog and digital
(ATSC) broadcasting signal.
[Cable] – Set the signal type
to cable. When set to Cable, the
20
Off On
Select
MENU
Antenna
Enter Select
Back
Exit