Audio - Haier LE32D2320 User Manual

DNR
Off Low
Video
MPEG NR

Audio

Adaptive Luma Control
TV
Adaptive Back Light
Film Mode
Setup
Parental
1. Advanced Video: Use the [CH-]
or [CH+] buttons to highlight one
of the following options, then press
[ENTER] to enter the sub-menu
and press[VOL-] or [VOL+] to
adjust.
[DNR] – Digital Noise Reduction.
You can clear up analog TV signal
by reducing the dot noise. (This
feature is not available at PC or
Media source.)
[MPEG NR] – Similar with DNR,
you can set to reduce the block
noise.
[Adaptive Luma Control] –
Dynamically change the brightness
and contrast according to the
amount of light and dark in the
signal.
[Adaptive Back Light] –
Dynamically change the back light
of the screen according to the
amount of light and dark in the
signal.
[Film Mode] – A frame rate
conversion to film format to avoid
signal flashing.
[VGA Mode] – Graphic/Video
(This feature is only available in
VGA mode).
• Graphic: In this mode, images look
smoother and text appears clearer. This
is the default setting.
• Video: In this mode, images look
Medium Strong Auto
Low
Medium
Off
Auto
Select Back
MENU
sharper. Select this mode for watching
videos from a computer.
[HDMI Mode] – Auto/Graphic/
Video (This feature is only available
in HDMI mode).
• Auto: Choose Video/Graphic
automatically.
• Graphic: In this mode, images look
smoother and text appears clear. Select
this mode when connecting a computer.
• Video: In this mode, images look
sharper. Select this mode when
watching videos from a computer or
connecting video players, such as a DVD
player, Blu-ray player, etc.
2. VGA:
[Auto Adjust] –Auto adjust
H.Position/V.Position/Phase/
Clock,select this option when
the image does not fill the entire
screen.
[H.Position] –Adjust picture's H
Postion.
[V.Position] –Adjust picture's V
Postion.
[Phase] –Adjust Phase.
[Clock] –Adjust Clock.
[Reset Computer settings] –
Reset H.Position/V.Position/Phase/
Clock.
AUDIO
Sound Mode
Video
Balance
Bass
Treble
Audio
Surround Sound
TV Digtial Audio Output
Setup
Parental
1. Sound Mode : Use the [CH-] or
[CH+] buttons to highlight one of
the following options, then press
19
Standard
0
50
50
Off
RAW
Enter Select Exit