ZA smart entry line Radio USA ÄJ 2010/Ma; 1; 2, en-US
sabbaeu
>> smart entry line radio.
8
Brightness menu item selected
X
Press 9 to confirm.
Adjusting the brightness
X
Press the = or ; button to darken
or brighten the display.
X
Press 9 or % to confirm and exit the
menu.
i
The display brightness can be set
differently for day and night operation.
When the lights are switched off, the day
operation settings are used and when the
lights are switched on, the night
operation settings are used. In night
operation, the brightness can be reduced
using the dimmer switch on the
instrument cluster (see vehicle
Operator's Manual).
Restoring the factory settings
X
Press the i button.
The system menu appears.
X
Press the : or = button to select
Settings
and press 9 to confirm.
Press the : button to select
Reset.
X
Press 9 to confirm.
The following prompt appears:
sure you want to reset? Yes No
The default selection is No.
2010-05-25T11:40:36+02:00 - Seite 8
Version: 3.0.3.6
X
If you do not want to restore the factory
settings, press 9.
X
Press % to exit the menu.
X
Press = and 9 to restore the factory
settings.
X
The following message appears:
system has been reset and will be
restarted
Switching the display on/off
Switching off the display:
X
Press the i button.
The system menu appears.
X
Press the : or ; button to select
Display
The display switches off.
Switching on the display:
X
Press the 9 button.
The display switches on again.
i
The display can also be switched on by
pressing any button except the mute
button and the station presets.
Audio
Radio mode
Notes
You can find information on the operating
system and the basic operation of the smart
entry line radio in the Overview of controls
Y
(
page 4) and Basic functions (
sections.
Switching on the radio
System
X
Press the q button.
The radio activates the last active
function.
Are you
If the last active function was radio
mode, the radio menu will appear. You
will hear the last station selected.
The
Off.
Y
page 5)
Need help?
Do you have a question about the entry line radio and is the answer not in the manual?