Table of Contents
Advertisement
Before installation read the
information in the "Appliance
Dimensions" and " Important Safety
Instruction" chapters.
Under certain conditions, there is a
danger of poisonous fumes by when
the ventilation system and a furnace
drawing interior air run at the same
time.
Installation instructions
The individual installation steps are
described in the included Installation
diagram.
Installation materials
4 screws 8 x 60 mm with
4 washers and
4 wall anchors S 10for securing the
ceiling plate to the ceiling
The screws and anchors are suitable
for mounting on concrete ceilings.
For other types of ceiling materials,
use appropriate materials.
Ensure that the ceiling can support
the load.
2 screws M4 x 8 mm for securing the
chimney.
4 levelling plates for correcting an
uneven ceiling.
1 vent collar for allowing a variable
position for the vent hole in the ceiling.
1 hose clamp for attaching the exhaust
duct to the vent collar.
Installation
27
Advertisement
Table of Contents
