D-Link NetDefend DFL-860 Quick Installation Manual page 14

Step 7.4 - WAN Interface Type is Big Pond
If you selected Big Pond
you will have to fill out the
user name and password
provided to you by your
ISP.
Click Next and continue
to step 8.
Step 8 - Set up built-in DHCP server
If you want to use the
built-in DHCP Server in
the DFL-860, choose
Enable DHCP Server
in this screen. You then
need to specify a range
of IP addresses to hand
out to the DHCP clients.
This range is entered in
the format "Start IP - Stop
IP" i.e. 192.168.0.100 -
192.168.0.200. If you don't
want to use the built-in
DHCP Server or configure
it later, choose Disable
DHCP Server.
DFL-860 Quick Installation Guide
Click Next
Click Next
12