Serial Ata (Sata) Interface; Hot -Plug Compatibility - Seagate ST9750423AS Product Manual

4.0 S ATA (SATA)
ERIAL
These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA programmed input/output
(PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6. The drive also supports the use of the IORDY signal to
provide reliable high-speed data transfers.
For detailed information about the Serial ATA interface, refer to the "Serial ATA: High Speed Serialized AT Attachment" specification.
4.1 H -P
OT LUG COMPATIBILITY
Momentus drives incorporate connectors which enable you to hot plug these drives in accordance with the Serial ATA: High Speed
Serialized AT Attachment specification revision 2.0. This specification can be downloaded from http://www.serialata.org. This device
requires a COMRESET from the host after a hotplug event.
M P M
OMENTUS RODUCT ANUAL
INTERFACE
, R . F
EV
21