Bluetooth; Configuring Bluetooth Settings - Iomega StorCenter px4-300r User Manual

40

Bluetooth

Once a Bluetooth adapter is detected, files can be uploaded to a configurable destination Share on the Iomega StorCenter px4-300r from a Bluetooth device.

Configuring Bluetooth settings

1. To enable Bluetooth, click the switch on.
2. Once Bluetooth Transfer is enabled, check the Enable security checkbox to require Bluetooth users to supply a unique PIN that they have defined
before allowing them to transfer files to the destination Share on the Iomega StorCenter px4-300r. If you have enabled security, you must define a
unique PIN number, which will be supplied by devices attempting to upload data using Bluetooth.
3. To set the destination Share, click
4. Click Apply to save your settings.
To change any Bluetooth settings, click
.
.
Iomega StorCenter px4-300r