Parallel Port - Gigabyte GA-7BESH-RH User Manual

Serial Port B
This allows users to configure serial prot B by using this option.
Enabled
Disabled
Base I/O Address/IRQ
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3

Parallel Port

This allows users to configure parallel port by using this option.
Enabled
Disabled
Mode
This option allows user to set Parallel Port transfer mode.
Bi-directional
EPP
ECP
Base I/O Address
378
278
Iterrupt
IRQ5
IRQ7
Enable the configuration
Disable the configuration.(Default setting)
Set IO address to 3F8/IRQ4.
Set IO address to 2F8/IRQ3. (Default setting)
Set IO address to 3E8/IRQ4.
Set IO address to 2E8/IRQ3.
Enable the configuration.
Disable the configuration. (Default setting)
Use this setting to support bi-directional transfers on the parallel
port. (Default setting)
Using Parallel port as Enhanced Parallel Port.
Using Parallel port as Extended Capabilities Port.
Set IO address to 378. (Default setting)
Set IO address to 278.
Set Interrupt as IRQ5.
Set Interrupt as IRQ7. (Default setting)
4 3
BIOS Setup