Summary of Contents for Yellowtec PC Audio Interface
- Page 1 Professional PC Audio Interface for USB User Manual made in germany www.yellowtec.com...
-
Page 2: Scope Of Delivery
Scope of delivery - PUC unit - USB cable, "A/B" type - User Manual - 4 self-adhesive bumper feet * - additional datasheets in case of special versions Before using this unit, please make sure to read the safety instructions on page 10 * Give your PUC a more firm stand by mounting the self-adhesive bumper feet. -
Page 3: Connecting Cable
Connection Yellowtec PUC is designed to operate as an Audio Converter at a USB port of your PC. PUC draws its power supply from the PC USB port. External supply is not needed, therefore a power input connector is not provided. -
Page 4: Audio Options
PUC automatically selects the audio source. If a digital audio signal is present at the digital input, this input will be selected. (Only condition: the input signal must be in a format that PUC identifies as convertable.) Otherwise the analogue inputs are selected. The outputs, digital and analogue, are simultaneously active. - Page 5 Settings using Windows XP Open "Sounds and Audio Devices Properties" (in the "Control Panels" folder). Select the register card "Volume" and set the control of "Device volume" to "High". set "Device volume" to "High" (maximum) click on "Apply" close the window by a click on "OK"...
- Page 6 Settings using Windows 2000 Open "Sounds and Multimedia Properties" (in the "Control Panels" folder). Select the register card "Sounds" and set the control of "Sound Volume" to "High". set "Sound Volume" to "High" (maximum) click on "Apply" close the window by a click on "OK"...
- Page 7 Working with application software Adapting analogue level standards Depending on its GPI settings PUC can handle maximum levels of +15dBu resp. +18dBu at the analogue inputs and outputs. This is related to the specified reference levels of +6dBu resp. +4dBu only by the settings (default or user) of your application software. If PUC is operated in delivery status (+15dBu max.
- Page 8 BLOCKDIAGRAMM AES/EBU AES/EBU ALTERNATIVE OPTION DIGITAL S/PDIF DEC INPUT AUTO SIGNAL SELECT ANALOG INPUT TO PC DEV. INT LVL Sample Rate Manager ANALOG OUTPUT PHONES OUTPUT BYPASS POWER MANAGER DIGITAL S/PDIF ENC OUTPUT digital ALTERNATIVE OPTION AES/EBU analog AES/EBU AUX POWER OUTPUT...
- Page 9 Sub-D Digital Audio Input Sub-D SUB-D25F Standard: S/PDIF Signal Pin 14 Zero Latency Mon. Pin 18 Shield Pin 2 BYPASS Dig. Bypass Pin 17 INT LVL International Level Pin 5 Optional: AES/EBU Signal+ Pin 14 Signal- Pin 2 active when connected to dig 0V, non active when left open or connected to +5V.
-
Page 10: Safety Instructions
Safety instructions - Before installation or operation of equipment read all safety instructions warnings and operating instructions. - Heed all warnings on the equipment. - Follow the operating instructions. - Only use the equipment for the purpose and in the way as described in the operating manual. -
Page 11: Limited Warranty Duration
Product or the inability to use any Product either separately or in combination with other equipment or materials, or from any other cause. Limited Warranty Duration The duration of limited warranty for YELLOWTEC PUC is one year according to the terms and conditions of warranty of the manufacterer (siehe Notice Of Warranty). - Page 12 YELLOWTEC is a brandname of THUM+MAHR GMBH Heinrich-Hertz-Strasse 1-3 D-40789 Monheim Tel. ++49 (0) 2173/967-315 Fax ++49 (0) 2173/967-400 www.thummahr.de...