Remote Management - D-Link DSL-2542B User Manual

Section 3 – Configuration

Remote Management

To access the Remote Management window, click the Remote Management button in the Advanced directory.
The Router allows remote Web and Telnet management in the top section
of the window. Tick the Enable Remote Management check box, enter an
IP address of the remote system used for management, enter optional
identifying information in the Details field if desired, and click the
Add/Apply button. Once the IP address appears in the bottom half of this
section, click the Reboot button on the left panel to let your changes take
effect.
Use the Access Control section in the middle of the window to restrict a
service from being accessed via the WAN interface. Click the Apply
Settings button and then click the Reboot button on the left panel to let
your changes take effect.
D-Link DSL-2542B User Manual 44