Sanyo SAP-K18AM Instruction Manual page 10

4. OPERATION OF WIRELESS REMOTE CONTROL UNIT
4.2 Remote Control Unit (Functions)
ON/OFF operation button
TEMP. setting button
FAN SPEED Selector button
CLOCK button
TURBO button
SLEEP button
Transmitter
Display
ON/OFF operation
MODE selector button
(AUTO)
(COOL)
(DRY)
(FAN)
(HEAT)
(+) / (-) setting
buttons
LOCK / UNLOCK
button
TIMER ON button
TIMER OFF button
Operation and Maintenance
BLOW button
When you press the buttons on the remote control unit, the
mark appears in the display to transmit the setting changes to
the receiver in the air conditioner.
Information on the operating conditions is displayed while the
remote control unit is switched on. If the unit is turned off, only
CLOCK and TEMP was displayed.
This button is for turning the air conditioner ON and OFF.
To select "AUTO" "COOL", "DRY" "FAN" or "HEAT" mode.
: When choosed this setting, the air conditioner calculates
thedifference between the thermostat setting and the room
temperature and automatically switches to the "COOL" or
"HEAT" mode as appropriate.
: The air conditioner makes the room cooler.
: The air conditioner reduces the humidity in the room.
: The air conditioner run the indoor fan only.
: The air conditioner makes the room warmer.
+
: Press the (+) button to increase set temperature, continue
press 2 seconds for fast increasing set temperature.
-
: Press the (-) button to reduce set temperature, continue
press 2 seconds for fast reducing set temperature.
: Press the
wireless remote controller.
: The air conditioner starts at the set time.
: The air conditioner stops at the set time.
Signal Transmitter
Display
MODE operation button
TEMP button
SWING button
TIMER ON button
TIMER OFF button
LIGHT button
- +
button at the same time to lock or unlock
EG
OPER
8