Table of Contents
Advertisement
OPERATING INSTRUCTIONS (continued)
PICTURE MENU (continued)
Selected characters
Picture Mode
Narrows the gap between
Contrast
brightness and darkness.
Black is subdued for
Brightness
increased overall darkness.
Color
Darkens colors.
Sharpness
Soft
Enhances red and weakens
Tint
green.
Cool
Color Temperature
Contrast Mode
Reset
(off the function)
YNR
CNR
Film Mode
PAL Comb Filter
LTI
CTI
Black Enhancement
Auto Color
Color Temp. Adjustment
Brighter scene is decreased in
Red
reddish color.
Brighter scene is decreased in
Amplitude
Green
greenish color.
Brighter scene is decreased in
Blue
bluish color.
Dark scene is decreased in
Red
reddish color.
Dark scene is decreased in
Green
Cut Off
greenish color.
Dark scene is decreased in
Blue
bluish color.
Day
Night
Broadens the gap between
brightness and darkness.
Black is set off for increased
overall brightness.
Lightens colors.
Sharp
Enhances green and weakens
red.
Normal
Warm
Black / White
Normal
Auto
Dynamic
(waiting to reset)
Off
Low
High
Off
On
Off
On
Off
Low
Middle
High
Off
On
Off
On
Brighter scene is increased in
reddish color.
Brighter scene is increased in
greenish color.
Brighter scene is increased in
bluish color.
Dark scene is increased in
reddish color.
Dark scene is increased in
greenish color.
Dark scene is increased in
bluish color.
Setup hint
Day: This setting is best for very bright ambient lighting.
Night: This setting is for normal lighting conditions.
Adjust for maximum visibility to suit the ambient brightness.
This can adjust further till [+40] by pressing and holding
button at [+31]. The color for [+32] to [+40] numbers will change from
white to magenta. This special mode is better for dark scenes.
For normal viewing we recommend that the Contrast is set to [+31].
"Panel Life" in the Function Menu should be set to Normal when this
Contrast setting is adjusted.
Adjust to taste.
Adjust to taste.
Normally set to Centre position Shift to the minus (-) side for a softer
effect and plus (+) for sharper picture.
This is not available to adjust when receiving PAL/SECAM signal.
Then the character will be grayed out.
Adjust for most realistic skin color.
Normally set to Cool.
Dynamic:Emphasizes the differences between video shadings to
improve the feeling of contrast.
Normal : The gradation of an image is reproduced as faithfully as
possible.
Auto:Detects image brightness and automatically adjusts for natural
brightness.
The original factory settings for the items of this Menu page can be
restored by pressing the OK button.
Performs picture signal noise reduction. Turn up to reduce noise.
Performs color signal noise reduction. Turn up to reduce noise.
And it will be fixed as Off only when selecting DVI-STB mode.
On:Automatically detects the movie film material and faithfully
reproduces the original film image.
Off:Set to OFF when switching between images does not appear
natural.
This is available only when receiving a PAL composite signal. Turn On
to reduce the discolorations in fine picture detail and provides purer
color.
Adjusts the sharpness of the picture signal.
Adjusts the sharpness of the color signal.
Adjusts the black level compensation.
This is available only when receiving an NTSC composite/S.Video
signal. This monitors and adjusts the color to maintain constant color
levels. It also maintains natural flesh tones while preserving fidelity of
background colors.
Turn On when you wish to change color temperature depending on
the user's preference.
Adjust color temperature depending on the user's preference. These
settings are independently stored in each of the 4 Color Temperature
modes.
cursor
39
Advertisement
Table of Contents
