Gardena 7875 Operating Instructions Manual page 3

G
Please Observe the Voltage The information on the rating plate and the data of the power
supply system must match.
Connection to The GARDENA Radio Remote Control Socket may only be
230 V AC sockets connected to 230 V AC sockets installed by an electrician which
meet the construction regulations in accordance with VDE 0100.
If necessary please contact your electrician.
Devices Devices up to a maximum of 1200 Watts may be connected to
the GARDENA Radio Remote Control Socket.
Child-Proof Your Radio Remote Control Socket has an integrated child-
safety feature.
Power Cut The programming is retained if there is a power cut.
x You should replace the batteries of the remote control
Batteries
annually. You must change the batteries straight away if you
decide to move the unit and drastically reduce the trans-
mission area.
x To ensure the Radio Remote Control Unit works properly
and safely only use a 9 V alkali-manganese (alkaline) battery
TYPE IEC 6LR61. Ensure you insert the battery correctly
(please note +/- markings).
18
Summary Operating Instructions
1 2
Insert the battery 1. Press the On/Off
in the GARDENA key. Keep the
Radio Remote On/Off key pressed
Control Unit. down while plug-
ging the GARDENA
Use a 9 V alkali- Remote Control
manganese (alkaline) Socket into a 230 V
battery Type IEC AC mains socket.
6LR61 and observe
the +/- markings. 2. Release the On/Off
key after 5 seconds.
3 4
Assigning keys of the 1. Plug the devices
GARDENA Radio you wish to control
Remote Control Unit remotely into the
to the corresponding GARDENA Radio
socket: Remote Control
Socket and switch
While the LED on on.
the Remote Control
Socket is flashing, 2. You can now switch
press one of the devices on and
On keys on the off using the Radio
GARDENA Remote Remote Control
Control and hold Unit.
down for 1 second.
G
19