Using The Aspect Feature - Hitachi 50HDA39 Operating Manual

Using the TV's Features
Selecting the movie mode
When you view a DVD movie (3:2 pulldown processed) from a DVD
player connected to the component video inputs on the TV,
smoother and more natural motion can be obtained by setting the
MOVIE MODE to FILM.
To set the MOVIE MODE to FILM:
1. Press TV to select the TV mode.
2. Press MENU, then press
appears.
3. Press ▲ or ▼ to highlight MOVIE MODE.
4. Press or
5. Press EXIT to return to normal viewing.
To set the MOVIE MODE to VIDEO (off):
Highlight VIDEO in step 4, above.

Using the ASPECT feature

When the ASPECT feature is set to ON and the TV receives a
480i signal, the picture size is automatically selected (as described
in the following table.)
Aspect ratio of
signal source
4:3 Normal
16:9 Full
4:3 Letter box
Not defined
If the signal does not include aspect information, the picture size
you selected on page 31 is displayed.
To turn on the ASPECT feature:
1. Press TV to select the TV mode.
2. Press MENU, then press
pears.
3. Press ▲ or ▼ to highlight ASPECT.
4. Press or
5. Press EXIT to return to normal viewing.
34
3X80801A_En_p30-39 34
or until the SETUP menu
to highlight FILM.
Automatic aspect size
(automatically selected when
ASPECT is ON)
4:3 STANDARD
16:9 STANDARD
4:3 EXPANDED/16:9 ZOOM1/16:9 ZOOM2
User-set mode
or until the SETUP menu ap-
to highlight ON.
Video Audio Setup Customize
SETUP
MOVIE MODE FILM / VIDEO
ASPECT OFF
SIGNAL METER
REVERSE
SCREEN WIPE
SCREEN SAVER ON
BLACK SIDE PANEL GRAY
:SELECT :ADJUST
Video Audio Setup Customize
SETUP
MOVIE MODE VIDEO
ASPECT ON / OFF
SIGNAL METER
REVERSE
SCREEN WIPE
SCREEN SAVER ON
BLACK SIDE PANEL GRAY
:SELECT :ADJUST
7/11/06, 8:08 PM
Locks
Locks