Operation - Emotiva XDA-2 User Manual

XDA-2

Operation

Line Voltage
The XDA-2 can operate from line voltages of 115 VAC +/- 10% or 230 VAC +/- 10%; when
the unit is powered on, it will automatically detect the correct line voltage and set itself
accordingly.
AC Power Switch (rear panel)
The rear-panel AC Power switch controls the main AC Power for your XDA-2. When this
switch is in the Off position, the DAC will not operate. Turning it On will put the XDA-2 into
Standby mode.
Standby Switch (front panel Push Button)
The Standby switch is a small black push button (which can be difficult to see in a dim
room). When the XDA-2 is in Standby mode, there will be no indicators lit on the front panel.
Pressing this button once (when the AC Power switch on the rear of the XDA-2 is On) will
switch the XDA-2 On; pressing it again will return the XDA-2 to Standby mode. The remote
control has separate buttons for On and Standby.
Please refer to the section entitled XDA-2 Front Panel (pages 7 and 8)
for further information about front panel controls.
Page 16