Emotiva UMC-200 User Manual page 4

DO NOT defeat the safety purpose of a grounding or polarized plug by removing ground pins or using
unsafe adapters. A polarized plug has two blades - one wider than the other. A grounding plug has a
third ground prong in addition to the two main conductors. The wide blade or third groundling prong is
provided for your safety. If the provided plug does not fit your outlet, consult an electrician to replace
your obsolete outlet. If you replace the UMC-200 power cord, only use one of similar type and equal or
greater current rating.
The power cable for the UMC-200 should be unplugged from the outlet during severe electrical storms,
or when unused for a long period of time.
Only replace the fuse(s) in the UMC-200 with a fuse(s) of proper value and voltage rating.
The UMC-200 should only be cleaned as directed in the manual. Avoid spraying liquids directly onto
the UMC-200 and NEVER spray liquids into the vents. Care should be taken so that small objects do
not fall into the inside of the UMC-200.
You should seek service for your UMC-200 by qualified service personnel if any of the following occur:
!
1. The power-supply cord or the plug has been damaged.
2. Objects or liquid have fallen or spilled into the vents.
3. The UMC-200 has been exposed to rain.
4. The UMC-200 exhibits a marked change in performance.
5. The UMC-200 has been dropped, or its enclosure or chassis is damaged.
NOTE: TO COMPLETELY DISCONNECT THE UMC-200 FROM THE AC POWER MAINS,
DISCONNECT THE AC POWER CORD FROM THE AC RECEPTACLE.
NOTE: THE UMC-200 AC POWER CORD MUST REMAIN READILY ACCESSIBLE AT ALL TIMES.
CAUTION
CAUTION: TO REDUCE THE RISK
OF ELECTRICAL SHOCK, DO
NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.