Umc-200 Rear Panel - Emotiva UMC-200 User Manual

UMC-200

UMC-200 Rear Panel

1 2 3 4 5 6 7 8
9 10 11 12 13 15 17
14 16
1. Antenna Inputs
Connect a 75 ohm FM antenna and/or an AM antenna to these inputs.
2. Unbalanced Audio Inputs (4 stereo sets)
Connect up to four stereo analog signal sources to these inputs.
3. 7.1 Channel Analog Inputs (1 set)
Connect one analog 7.1 channel surround sound signal source to this set of inputs. These
inputs are typically used to connect the outputs of an SACD player or computer which has
its own internal decoders and DACs (and provides a set of analog outputs).
4. Digital Audio Inputs (2 SPDIF Coax; 2 Toslink Optical)
Connect up to four digital audio source devices to these inputs.
5. USB Bluetooth Dongle Port
Use this port to connect the (optional) USB Bluetooth dongle, which will allow you to send
audio to the UMC-200 from various Bluetooth-enabled devices. Please note that this port
works ONLY with the Emotiva Bluetooth adapter.
6. HDMI Inputs (4)
Connect up to four HDMI 1.4 devices to these inputs. The UMC-200 supports all versions of
HDMI up to HDMI v1.4.
7. HDMI Output
Connect one HDMI television, monitor, or projector to this output. The UMC-200 supports
HDMI standards up to and including HDMI v1.4.
Page 11