Table of Contents
Advertisement
PT-7030: User Manual
3. Component Video Outputs (1 set)
Provide a component video version of the main zone video output.
Note: The Component Video Output will ONLY provide video signals when there is a
component video signal available from one of the Component Video Inputs.
Note: The OSD is only displayed over video on the HDMI output; it is not displayed on video
output from the Component Video outputs.
4. Component Video Inputs (2 sets)
Provide inputs for component video sources (2); the input will be upsampled at high quality to the
output resolution specified (if different from the input resolution) and can be output on HDMI.
Note: If the PT-7030 is connected to a TV which cannot show the selected output resolution
(you get a blank screen), pressing the 2CH and Mute buttons on the front panel at the same
time will change the video resolution to 480p/576p.
Page 14
Hide quick links:
Advertisement
Table of Contents
