Hitachi 42HDS52 Operating Manual page 63

Setup
7. Use the CURSOR PAD
Soft Key to learn (Ex. VOL
button.
8. Press and hold the VOL
Receiver remote control while pointing directly at the
learning AV NET sensor of the Plasma TV (located at
the lower right corner of the screen) at a distance of 5
to 10 feet or 2 to 3 meters.
9. If the IR code transfer was not completed, the screen
on the right appears. Repeat step 8 to try again.
10. If the IR code transfer was successful, the screen on
the right appears, then select "OK" to continue setup.
11. Select another Soft Key to learn or select DONE to
move on to the next screen.
, , and to select the
), then press the SELECT
button of your A/V
AV Net Setup Wizard : Custom Settings
Select the A/V Receiver softkey to learn?
TV Softkeys
POWER CH VOL
MUTE CH VOL AUDIO
SOURCE 1 SOURCE 2 SOURCE 3 SOURCE 4 SOURCE 5
SOURCE 6 SOURCE 7 SOURCE 8 SOURCE 9 SOURCE 10
Back
Move SEL Select
AV Net Setup Wizard : A/V Receiver Setup
Press and hold desired button to transfer the
command to AV NET.
VOL
Please wait while AV NET
Learns the command....
Move Select
SEL
AV Net Setup Wizard : A/V Receiver Setup
VOL
Transfer not completed!
Try again?
Cancel
Move SEL Select
AV Net Setup Wizard : A/V Receiver Setup
VOL
Transfer was successful.
Press OK to store and continue.
Cancel
Move SEL Select
AV Net Setup Wizard : Custom Settings
Select the A/V Receiver softkey to learn?
TV Softkeys
POWER CH VOL
MUTE CH VOL AUDIO
SOURCE 1 SOURCE 2 SOURCE 3 SOURCE 4 SOURCE 5
SOURCE 6 SOURCE 7 SOURCE 8 SOURCE 9 SOURCE 10
Back
Select
Move SEL
Done
OK
OK
Done
63