Hitachi 42HDS52 Operating Manual page 60

Setup
13. Use the CURSOR PAD
Receiver Source if you have connected the Monitor
Out and Optical Out to the A/V receiver. Select " Not
Connected " if not used.
14. Use the CURSOR PAD
NEXT, then press the SELECT button to move on to
the next SETUP screen.
15. If you would like to label your A/V Receiver Source,
use the CURSOR PAD
then press the SELECT button to continue. Selecting
" No " will bypass the Source labeling.
16. Use the CURSOR PAD
Receiver Sources.
17. Use the CURSOR PAD
Receiver Sources.
18 Use the CURSOR PAD
NEXT, then press the SELECT button to move on to
the next SETUP screen.
19. Confirm all settings, then press the SELECT button
to move on to the next SETUP screen.
20. Press SELECT to setup another device or use the
CURSOR PAD
done ", then press the SELECT button to exit the A/V
NET SETUP.
60
or to select the A/V
, , and to highlight
or to highlight " Yes "
or to select your A/V
or to label your A/V
, , and to highlight
or to highlight " No thanks, Im
AV Net Setup Wizard : A/V Receiver Setup
Brand Name Hitachi (44/54)
IR Code Set 3 (3/12)
TV Input Hitachi
Monitor Out Settings
If you connect the Monitor out or Optical out
to an A/V Receiver, please select
an A/V Receiver Source.
Monitor Out Not Connected
Optical Out Not Connected
Back
Move Change Source Select
SEL
AV Net Setup Wizard : A/V Receiver Setup
Brand Name Hitachi (44/54)
IR Code Set 3 (3/12)
TV Input Not Connected
Monitor Out Not Connected
Optical Out Not Connected
Would you like to relabel the Source buttons?
Back No
Move SEL Select
AV Net Setup Wizard : A/V Receiver Setup
Source Settings
Source Name
Source 1 ----------
Source 2 ----------
Source 3 ----------
Source 4 ----------
Source 5 ----------
Source 6 ----------
Source 7 ----------
Source 8 ----------
Source 9 ----------
Source 10 ----------
Back
Move Change Name SEL Select
AV Net Setup Wizard : A/V Receiver Setup
Brand Name Hitachi (44/54)
IR Code Set 3 (3/12)
TV Input Not Connected
Monitor Out Not Connected
Optical Out Not Connected
All settings are complete!
Back
Move SEL Select
AV Net Setup Wizard : A/V Receiver Setup
Congratulations!
Your A/V Receiver is now
connected to your AV network.
Would you like to setup another device?
No thanks, I'mdone. Yes
Move Select
SEL
Next
Yes
Next
Next