Vauxhall KTA-2690/7-VX-en Owner's Manual page 200

Storing a replaced wheel in the
load compartment using a strap
Use the strap placed in the tool box.
Vehicle tools 3 188.
■ Position the wheel on the load
compartment floor close to one
sidewall of the load compartment.
■ Place the loop end of the strap
through the front lashing eye of the
according side.
■ Place the hook end of the strap
through the loop and pull it until the
strap is fastened securely to the
lashing eye.
■ Insert the strap through the spokes
of the wheel as shown in the
illustration.
■ Mount the hook to the rear lashing
eye.
■ Tighten the strap and secure it
using the buckle.
Storing a replaced wheel in the
spare wheel well using an
extension bar
Use the extension bar placed in the
tool box. Vehicle tools 3 188.
■ Turn the wing nut anticlockwise and
remove temporary spare wheel.
Vehicle care
■ Take the extension bar from the
tool box and screw it on the bolt.
■ Store the damaged wheel and
secure it by turning the wing nut
clockwise.
The floor cover can be placed on the
projecting wheel.
Remove the extension bar before
fitting the spare wheel in the well after
renewing or repairing the defective
wheel.
199