Hitachi 32HDL52A Operating Manual page 29

5. RECALL button: Press to display source input signal on the display.
6. SLEEP button: Press to set sleep mode timer. There are 30 minutes, 60 minutes, 90 minutes, 120 minutes and turn off to select.
7. PC Source button:
8. VIDEO Source button: Set up the input source of Video; including Video1 (Y1P
Video4 (AV2 / SV2). If both SV and AV had signal input at the same time, the SV has higher priority output.
9. NTSC Source button: Set up the input source of NTSC; including CATV / AIR.
10. DTV Source button: Set up the input source of DTV Mode.
11. Menu button: Turn on OSD (On-Screen Display) menu.
12. Direction buttons:
i. (▲/▼/◄/►/SEL): All the OSD features can be set or adjusted by using these buttons; it will highlight functions or
adjust and set different features. Press it to toward desired direction and press the SEL button to select. (You can
notice that the OSD prompt message to through these keys operation)
ii. (▲/▼): In PIP mode, Press "▲" or "▼" buttons to select which display window will be changed. Meanwhile, the
speaker icon will be displayed on selected display window. User can change input video source on selected display
window by pressing remote control source keys.
iii. (◄/►): In POP mode, Press "◄" or "►" buttons to select which display window will be changed. Meanwhile, the
speaker icon will be displayed on selected display window. User can change input video source on selected display
window by pressing remote control source keys.
iv. (◄/►): Press "◄" button to turn swivel left and press "►" button to turn swivel right while OSD indicator for swivel is
displayed on TV screen.
13. Exit button: This button will exit all OSD.
14. Volume (+/-) button: Press to select the desired volume.
15. DTV Menu: Turn on DTV OSD (On-Screen Display) menu in DTV Mode.
16. Channel (+/-) button: Press to select the desired channel.
17. Freeze button: Pause the image in DTV Mode.
18. INFO button: Display information of DTV Mode: Channel Banner, time, Closed Caption status, and resolution Mode.
19. FAV.CH: Switch to favorite channel in DTV Mode.
20. C.C. button: Press to turn on/off TV Closed Caption.
21. P. Mode button: Select picture status, there are Dynamic, Natural, Cinema and Game.
22. MTS button: Press to set sound mode, there are Stereo, SAP and Mono.
23. Aspect button: Press repeatedly to change image to different aspects. Aspects include 4:3 STANDARD, 4:3 EXPANDED, 4:3
ZOOM1, 4: 3 ZOOM2, 16:9 STANDARD, 16:9 ZOOM.
Depending on the input signal format received, the picture format ratio allows you to adjust the images through the following options.
4:3 STANDARD
4:3 EXPANDED
4:3 Zoom1/Zoom2
16:9 STANDARD
16:9 Zoom
Press to select PC mode or HDMI mode.
Use this aspect mode to display conventional (4:3) images. Side panels (gray areas) are placed to the left
and right of the image to preserve the original aspect ratio of the source. Note: Use this mode for only 15% of
your total viewing time to prevent uneven aging of the phosphors. Phosphors in the lighted area of the
picture will age more rapidly than the gray areas.
Use this aspect mode to display conventional (4:3) sources by linearly increasing image expansion from the
center towards the edges of the display area in order to fill it.
Use these aspect modes to zoom in on conventional (4:3) sources.
Use this aspect mode to display 16:9 sources like HDTV and DVD's preserving the original 16:9 aspect ratio.
Use this aspect to Zoom-in once while in 16:9 aspect.
1P 1), Video2 (Y2P
B R
28
2P 2), Video3(AV1 / SV1),
B R