Table of Contents
Advertisement
TIPS ON REAR PANEL CONNECTIONS
• S-VIDEO (Video 3 or Video 4) or Y-P
that have this feature. Use these connections in place of the standard video connection if your device has this feature.
• If your device has only one audio output (mono sound), connect it to the left (L) audio jack on the TV.
• Refer to the operating guide of your other electronic equipment for additional information on connecting your hook-up cables.
• Connect only 1 component (VCR, DVD player, camcorder, etc.) to each input jack.
• COMPONENT: Y-P
P
(Video 1 or Video 2) connections are provided for higher performance devices appliance, such as DVD players
B
R
and set-top-boxes. Use these connections in place of the standard video connection if your device has this feature.
• Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the TV's P
components R-Y output to the TV's P
• It may be necessary to adjust TINT to obtain optimum picture quality when you use the Y-P
• To ensure no copyright infringement, the VIDEO OUTPUT will be abnormal, when using the Y-P
PC RGB IN and DVI-IN input jacks.
• When you use a DVI-IN input from a Set-Top-Box, it is recommended to use a 1080i or 720p input signal.
P
(Video 1 or Video 2) connections are provided for higher performance laserdisc players etc.
B
R
input.
R
26
input and the
B
P
inputs (Video 1 or Video 2).
B
R
P
(Video 1 or Video 2),
B
R
Hide quick links:
Advertisement
Table of Contents
