Advertisement
SPECIFICATIONS
Input channels
Mic input
Mic E.I.N. (22 Hz - 22 kHz)
Distortion (THD&N)
Gain range
Max input (Mic)
Line input
Sensitivity range
Max input (Line)
Channel fader range
Aux Send gain range
Equalization
Hi shelving
Mid bell
Lo shelving
Lo Cut (High Pass) filter
Main Mix Section
Noise
Max output
Aux Returns gain range
Aux Sends max out
General
Distortion (THD&N)
Frequency Response
Physical
Dimensions (H * W * D)
Net Weight
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time
to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
4
electronically balanced, discrete input configuration
-129.5 dBu, 150 Ohm source
-117.3 dBqp, 150 Ohm source
-132.0 dBu, input shorted
-122.0 dBqp, input shorted
0.007% at +4 dBu, 1 kHz, Bandwidth 80 kHz
+10 dB to +60 dB
+12 dBu
electronically balanced
+10 dBu to -40 dBu
+22 dBu
+10 dB to -85 dB
off to +15 dB
12 kHz +/- 15 dB, Q fixed at 2 oct.
100 Hz - 8 kHz +/- 15 dB, Q fixed at 1 oct.
80 Hz +/- 15 dB, Q fixed at 2 oct.
-3 dB at 75 Hz, 18 dB/oct.
bus noise, fader 0 dB, channels muted:
-100.0 dBr (ref.: +4 dBu), fader 0 dB, all input channels assigned and
set to Unity Gain: -88.5 dBr (ref.: +4 dBu)
+28 dBu balanced XLR,
+22 dBu unbalanced, 1/4" jacks
off to Unity to +20 dB
+22 dBu
0.007 %, at +4 dBu, 1 kHz, bandwidth 80 kHz
below 0.02 %, 22 Hz - 22 kHz normal operating levels,
any input to any output, bandwidth 80 kHz
10 Hz - 120 kHz +/- 3 dB, any input to any output
app. 1 1/2" / 3 1/2" (40 / 90 mm) * 16 1/4" (410 mm) * 15 1/4" (385 mm)
app. 5.4 kg (PSU not included)
Advertisement
