Troubleshooting - Warwick LWA 1000 Owner's Manual

TROUBLESHOOTING

We apologize if your new amplifier doesn't work as intended. We recommend this simple DIY troubleshooting because often the solution
to the problem is most likely simpler than it seems.
• Amp does not power up.
- Check whether the correct fuse is inserted in the fuse compartment and that it is intact.
• There is no sound from the amp and LEDs don't light up
- Check your AC mains outlet.
- Check power cord and power switch position.
• There is no sound from the amp but LEDs light up
- Check amp Gain and/or Volume controls, check bass controls.
If the problem isn t covered above or if the troubleshooting tips does not help then contact Warwick for further service information.
'
Due to our constant research and development efforts, product specifications are subject to change without prior
notice.
11