Recall Function; Taking Weight Measurement Only - Tanita BF-2000 Instruction Manual

Healthy Range Indicator
Underfat : Below the healthy body fat range. Increased risk for health problems.
Healthy : Within the healthy body fat percentage range for your age/gender.
Overfat : Above the healthy range. Increased risk for health problems.
Obese : High above the healthy body fat range. Greatly increased risk of obesity-related health problems.

5.Recall Function

The previous readings of the following features can be obtained using the recall function.
• Weight • Body Fat %
To obtain previous readings, press the SET button while the current readings are being displayed.
The display will show the previous readings. To see other previous readings, press s
Press SET again to go back to the current result display.
6.Programming The Guest Mode (Applicable Age: 5 - 17)
Guest mode allows you to program the unit for a one-time use without resetting a personal data number.
Press s button to activate the unit. Then follow the steps: Set Age, Select Female or Male, and Specify Height.

7.Taking Weight Measurement Only

Press the Weight-only key.
Step onto the platform while the Green Indicator Light is blinking.
After the measurement is complete, the platform will beep twice, readings will automatically show on the remote display.
Carefully step off platform after measurement is complete.
8.Switching The Weight Unit Mode (kg / lb)
Select your preferred weight unit mode using the weight mode switch on the bottom of the remote display.
Warning
Do not use the body fat reading feature of this product if you have a pacemaker or other electronic implanted medical
device. The body fat monitor function is not intended for pregnant women, professional athlete or bodybuilders.
/
t buttons for each desired reading.
5