Introduction; Features And Functions - Tanita BF-2000 Instruction Manual

Introduction

Thank you for selecting a Tanita Body Fat Monitor. This monitor is one in a wide range of home
healthcare products produced by Tanita.
This Instruction Manual will guide you through the setup procedures and outline the key features.
Please keep it handy for future reference. Additional information on healthy living can be found on our
website www.tanita.com.
Tanita products incorporate the latest clinical research and technological innovations.
All data is monitored by our Tanita Medical Advisory Board to ensure accuracy.
Note: Read this Instruction Manual carefully and keep it handy for future reference.
Safety Precautions
People with an electronic medical implant, such as a pacemaker, should not use a Body Fat Monitor as it passes a low-level electrical
signal through the body, which may interfere with its operation.
Pregnant women should use the weight function only. All other functions are not intended for pregnant women.
Do not place this monitor on slippery surfaces such as a wet floor.
Important Notes for Users
This Body fat monitor is intended for children (ages 5-17) with inactive to moderately active lifestyles.
The body fat monitor function is not intended for pregnant women, professional athletes or bodybuilders.
Note: Body fat percentage estimates will vary with the amount of water in the body, and can be affected by dehydration or over-
hydration due to such factors as alcohol consumption, menstruation, illness, intense exercise, etc. It is recommended that if
possible all readings should be taken at the end of one's day since in the morning after rising from sleep, hydration levels are
at their lowest.
Tanita takes no responsibility for any kind of damage or loss caused by the monitor, or any kind of claim made by a third
person.

Features and functions

Measuring Platform
1. Indicator light (Green and Red)
2. Ball-of Foot Electrodes
3. Heel Electrodes
Accessories
4. AA-Size Batteries (4)
5. Carpet Feet (4)
1