Yealink SIP-T2 Series Auto Provisioning Manual page 140

Yealink IP Phones Auto provisioning Guide
Permitted
Parameter
features.remot
e_phonebook.
enable =
(not
applicable to
SIP-T20P IP
phones)
features.remot
e_phonebook.
flash_time =
Integer from
(not
applicable to
SIP-T20P IP
phones)
String within
features.hotlin
e_number =
characters
features.hotlin Integer from
e_delay =
features.dtmf.
hide =
features.dtmf.
hide_delay =
(not
applicable to
SIP-T20P IP
phones)
features.dtmf.r
epetition =
134
Values
It enables or disables the phone to
perform a remote phone book search
when receiving an incoming call.
0 or 1
0-Disabled
1-Enabled
The default value is 0.
It configures the interval (in seconds)
for the phone to update the data of the
remote phone book from the remote
3600 to
phone book server.
2592000
The default value is 21600.
It configures the hotline number.
32
The default value is blank.
It configures the delay time (in
seconds) for the phone to dial out the
hotline number automatically.
0 to 10
The default value of delay time is 4.
It enables or disables the phone to
suppress the display of DTMF digits.
0-Disabled
0 or 1
1-Enabled
The default value is 0.
It enables or disables the phone to
display the DTMF digits for a short
period before displaying as asterisks
when the parameter
"features.dtmf.hide" is set to 1
0 or 1
(Enabled).
0-Disabled
1-Enabled
The default value is 0.
It configures the repetition times for
1, 2 or 3
sending the DTMF packets.
Descriptions Web Setting Path
Directory->Remote
Phone Book->
Search Remote
Phonebook Name
Directory->Remote
Phone Book->
Search Flash Time
(Seconds)
Features->General
Information->
Hotline Number
Features->General
Information->
Hotline Delay
(0~10s)
Features->General
Information->Supp
ress DTMF Display
Features->General
Information->Supp
ress DTMF Display
Delay
Features->General
Information->DTM