Cable And Vcr Codes; Cable Brand Codes - Hitachi 50FX18B Operating Manual

CABLE AND VCR CODES

not turn off after 5 seconds, try a different 2 digit preset code.
4. The remote will now control your cable/satellite box.
NOTES:
1. If your cable/satellite box cannot be operated after performing the above procedures, this
means that your cable/satellite box code has not been precoded into the remote.
2. In the unlikely event that your cable/satellite box cannot be operated after performing the
above procedures, please consult your cable/satellite box operating guide.
3. The remote control will remember the codes you have programmed in until the batteries
are removed from the remote control. After replacing the batteries repeat the entire
programming procedure stated above.
4. If your cable/satellite box does not have a power function, the remote will issue the
CHANNEL UP function.
5. The EXIT button will act as the cable/satellite box ENTER button if required.
6. The INPUT button will act as your cable/satellite box +100 button if required.
1 CABLE button
This button allows the remote to control your cable box by setting it to CABLE mode.
2 PRECODED CABLE/SATELLITE BOX buttons
These buttons transmit the chosen precoded CABLE/Satellite codes.
3 EXCLUSIVE TV buttons
These buttons are for operating the TV.
CABLE AND VCR CODES
CABLE BRAND
ABC
Antronix
Archer
Belcor
Cable Star
Century
Citizen
Colour Voice
Comtronics
Contec
Dae Ryung
Eastern
Electricord
Everquest
Focus
Garrard
GC Electronics
Gemini
General Instruments
CODES
01, 03, 05, 06, 09, 11, 12, 14, 30
44
28, 40, 44
31
31
40
40
19, 25
29, 34
15
06
02
37
13
57
40
31, 44
13, 32, 36, 46
09, 51
- 25 -