Rear Panel Connections; Rear Speaker Terminal Connections - Hitachi 50FX18B Operating Manual

REAR PANEL CONNECTIONS

cable into the left channel jack.)
3 Monitor Out
These jacks provide fixed audio and video signals which are used for recording.
4 Audio to Hi-Fi
These jacks provide variable audio output to a separate stereo system amplifier. With
this connection, the audio to the stereo can be controlled by the televisions main
volume.
5 Transmitter Out
These jacks provide variable audio output to a set of wireless speakers. They can also
be used for another stereo system amplifier. With this connection, the audio can be
controlled by the televisions remote control.
6 Rear Speaker Terminals
These terminals are used to connect external speakers, which are used for the surround
sound feature. The volume level is controlled by the remote control main volume
buttons. Use speakers with 8 Ohm impedance only.
7 S-Video
Input 1 provides S-Video (Super Video) jacks for connecting equipment with S-Video
output capability.
8 Speaker Matrix Surround Switch
Use this switch to choose between the surround and external speaker features. See
page 13 for Audio System Setup. The TV's Internal Speakers will be switched off when
"EXT." is selected.
REAR PANEL CONNECTIONS
Typical full feature set-up. Follow connections that pertain to your personal
entertainment system.

REAR SPEAKER TERMINAL CONNECTIONS

Connect after turning the power to the TV OFF.
Press the Right Speaker red button and insert the positive (+) lead wire into the hole
below the button. When the button is released, the wire is locked into place. In the same
manner, press the Right Speaker black button and insert the negative (-) lead wire.
Repeat this procedure for the Left Speaker.
CAUTION: Do not short speaker terminals, (do not connect a wire directly
across any two terminals). This could cause damage to your audio outputs or damage your
TV in other ways.
- 14 -