– Margin: The additional wait time (in seconds) to FLI_TOV (FLOGI wait
time) or PLI_TOV (PLOGI wait time). This value is automatically set by
Universal Volume Manager. You cannot change the value. As a result,
the sum of FLI_TOV time and the margin time, or the sum of
PLI_TOV time and the margin time is set as a total wait time.
– Status: Status of the cross-subsystem path. Table 4-7 shows the
displayed statuses.
•
Pop-up menu
Right-click a row in the Path Operation list to perform the operations from
the pop-up menu (Table 4-8).
Table 4-7
Displayed
Item
Normal
-
Unknown
Blockade
Disconnect
Warning
Checking
Table 4-8
Pop-up Menu
Disconnect
Paths
Check Paths
4-16
Hitachi Universal Storage Platform V/VM Universal Volume Manager User's Guide
Status of the Cross-subsystem Path Displayed in the Status
The cross-subsystem path is normal.
The status of the cross-subsystem path is not retrieved yet. Click Status: Disable in
the Path Operation window to display the status of the cross-subsystem path.
The status of the cross-subsystem path is unknown.
The cross-subsystem path is blocked.
Connecting to the external storage system or the external volume is intentionally
stopped using the Disconnect Subsystem command or the Disconnect Volume
command.
There are cross-subsystem paths whose status is not normal. Check the status of the
cross-subsystem paths.
The processing of checking the cross-subsystem path status is in progress.
Pop-up Menu in the Path Operation List (when Subsystem is
clicked)
Allows you to stop the use of the cross-subsystem paths which are connected to the
selected external port of the local storage system.
Allows you to resume using the cross-subsystem paths which are connected to the
selected external port of the local storage system.
Using the Universal Volume Manager GUI
Description
Description