At The End Of The Programme; Cancelling The Programme - AEG FAVORIT 34030VI User Manual

Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode.
3. Press continuously the programme
button until the indicator of the pro-
gramme you want to set comes on.
4. Close the appliance door. The pro-
gramme starts.
Starting a programme with
delay start
1. Set the programme.
2. Press the delay button to delay the
start of the programme of 3 hours. The
delay indicator comes on.
3. Close the appliance door. The count-
down starts.
• When the countdown is completed,
the programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start while
the countdown operates
1. Open the appliance door.
2. Press the delay button, the delay indi-
cator goes off.
3. Close the appliance door. The pro-
gramme starts.

Cancelling the programme

1. Open the appliance door.
2. Press and hold the programme button
until the indicator of the set pro-
gramme goes off and the end indica-
tor flashes.
Make sure that there is detergent
in the detergent dispenser before
you start a new programme.

At the end of the programme

When the programme is completed, an
intermittent acoustic signal operates and
the end indicator comes on.
1. Press the on/off button to deactivate
the appliance.
2. Close the water tap.
• Let the dishes become cold be-
fore you remove them from the
appliance. Hot dishes can be
easily damaged.
• First remove the items from the
lower basket, then from the up-
per basket.
• There can be water on the sides
and on the door of the appli-
ance. Stainless steel becomes
cool more quickly than the
dishes.
ENGLISH
15