Connect To A Wireless Network; Using Windows ® Xp - D-Link DAP-1160 User Manual

Section 4 - Connecting to a Wireless Network

Connect to a Wireless Network

Using Windows
®
XP
XP users can use the built-in wireless utility (Zero Configuration Utility) to connect to a wireless network.
®
Windows
®
The following instructions are for Service Pack 2 users. If you are using another company's utility or Windows 2000,
please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities
®
will have a "site survey" option similar to the Windows XP utility as shown below.
If you receive the Wireless Networks Detected bubble, click
on the center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select View Available
Wireless Networks.
The utility will display all available wireless networks in your
area. Click on a network (displayed using the SSID) and click
the Connect button.
If you get a good signal but cannot access the Internet,
check the TCP/IP settings for your wireless adapter. Refer
to the Networking Basics section in this manual for more
information.
D-Link DAP-1160 User Manual 45