Wisp Client Router; Wisp Repeater - D-Link DAP-1160 User Manual

Section 2 - Configuration
In WISP Router Client mode, the DAP-1160 wirelessly connects to a WISP (Wireless Internet Service Provider) AP. In this mode, the DAP-
1160 also acts as a router for wired clients on your LAN and provides NAT (Network Address Translation) and a DHCP server to generate
IP addresses for wired clients. NAT and the DHCP server allow many computers to share the same wireless Internet connection.
WISP Repeater wireless mode acts the same as WISP Client Router wireless mode, with the addition of a wireless signal for any wireless
clients on the LAN.
Wireless Network
You can input the wireless network name of the
Name:
root AP or click the Site Survey button to find
the root AP.
Site Survey:
Click this button to choose the root AP from
an available connection list. If the root AP has
wireless encryption, you have to use the same
wireless security mode to connect the root AP.
Wireless The channel used will be displayed. The
Channel:
channel will follow the root AP.
Enable Auto
This option is unavailable in WISP Client Router
Channel Scan:
and WISP Repeater mode.
Enable Hidden
This option is unavailable in WISP Client
Wireless:
Router and WISP Repeater mode.
Wireless
Select a wireless security setting. Options are None, WEP, WPA, or WPA2. See p.38 of this manual for a detailed
Security Mode:
explanation of the wireless security options.
D-Link DAP-1160 User Manual
WISP Client Router and WISP Repeater
17