Hitachi VM-H620A Instruction Manual page 58

General Maintenance
Interference on playback picture.
Picture bends at the top of the TV
screen
Color of your TV screen is too bright,
too faint of change.
Date search function does not operate.
The playback picture moves rapidly
and noise appears. Also sound
speeded up from normal is heard.
.
BATTERY CONDITION
Symptom
The ( ) indication in the electronic
viewfinder flashes to indicate battery is
discharged.
NO OPERATION IS ACCEPTED
Symptom
Power is turned on, but no button
When you see the playback picture on
your TV, adjust fine tuning knob on
television set to obtain best picture.
TV receiver is of older type. It need to
be modified to work properly with
camcorder.
Tape is damaged. Try another
cassette.
TV set has the VIR circuit. Turn it off
during playback.
Slide the CAM/OFF/VIDEO switch to
VIDEO>
Insert the clock battery, set the date
and time, then start recording.
Do not remove the clock battery after
recording.
Do not eject the recorded cassette.
Leave it in the camcorder.
The camcorder is set to the double
speed playback mode. Pressing the
playback button to restore the normal
playback mode. The sound also
returns to normal speed.
Noise appears in the picture during
double speed playback, but this does
not indicate a fault.
Check Point & Correction
Try another battery or charge the
battery.
Check Point & Correction
Remove the power source and the
- 58 -