Using The Wireless Remote Control; Creating And Recording A Title - Hitachi VM-H620A Instruction Manual

Advanced Techniques
Note: The linear time counter with the memory feature in the viewfinder can also be
displayed on the connected television.

Using the Wireless Remote Control

Use the wireless remote control to operate the camcorder from a distance. The PLAY, F.FWD,
REW, STOP, PAUSE (START/STOP) and ZOOM buttons on the wireless remote control operate
the functions of the corresponding buttons on the camcorder. Aim the wireless remote control at
the infrared receiver of the camcorder.
Aiming remote Illustration
Note: Use the wireless remote control within the range of the infrared receiver of the
camcorder shown above.
Note: The wireless remote control may not function in strong light such as direct sunlight or
very bright artificial lighting.
Note: Clear a direct path from the wireless remote control to the infrared receiver. The
wireless remote control won't work if an obstacle blocks the infrared rays.
Note: The remote control code of this camcorder is Hitachi code VCR2. If you have a VCR
with the same code your Hitachi VCR may malfunction when you use the camcorder's
wireless remote control.

Creating and Recording A Title

Create titles easily and personalize your recordings while keeping a permanent visual record of
what is contained on a tape. The camcorder can store a title in its memory. A title stored in
memory can be displayed and recorded at any time. A title contains two lines of up to 16
characters per line. The camcorder contains 47 different characters for creating a title. When
creating and recording a title, use the TITLE ON/OFF button on the remote control. (When
creating a title in the CAM mode, the DATE/TITLE button of the camcorder can be used instead
of the TITLE ON/OFF button on the remote control. " TITLE" should be displayed in the
viewfinder at this time.)
Note: Be sure to insert the clock battery before creating a title. Although a title can be created
without the clock battery inserted, it will disappear when the battery providing power to the
camcorder is removed.
Creating a Title
1. Connect the camcorder to a power source.
2. Hold down the red button on the CAM/OFF/VIDEO switch and slide it to either CAM or VIDEO.
3. Press the TITLE ON/OFF button on the remote control and a flashing cursor appears in the
viewfinder.
- 43 -