Table of Contents
Advertisement
Advanced Techniques
Using Audio/Video Dubbing
Use audio/video dubbing to record audio and video from the camcorder's built-in
microphone and camera onto a previously recorded tape in the camcorder.
Audio/Video Dubbing Illustration
1. Connect your camcorder to the television, following "Connecting to a Television with
Audio In and Video In Jacks" on page 27.
2. Turn on your television and place it in the camcorder input mode (consult your
television manual for details).
3. Hold down the red button on the CAM/OFF/VIDEO switch while sliding the switch to
VIDEO.
4. Insert a previously recorded tape in the camcorder.
5. Use the wireless remote control and press the PLAY button. Use the PLAY, F.FWD,
and REW buttons to find the place where you want to stop dubbing. Press the PAUSE
(START/STOP) button.
6. Display the linear timer counter with memory ("Using Memory," p.40). Press the
COUNTER RESET button to set the linear time counter to 0:00:00M.
7. Use the REW and PLAY buttons to find where you wish to start dubbing. Press the
PAUSE (START/STOP) button.
8. Press and hold the A/V DUB button while pressing the PLAY button. This places the
camcorder in A/V DUB pause mode.
9. Press the PAUSE (START/STOP) button. The audio/video dubbing starts. When the
linear time counter reaches 0:00:00M the camcorder stops automatically, recording only
the portion of the tape that you selected.
Note: If the camcorder is in AV DUB pause or STILL mode for more than 5 minutes, the
camcorder stops automatically to protect the tape.
Note: Automatic date recording is disabled during audio/video dubbing.
Note: When the audio/video dubbed portion is played back, noise may appear at the end of
the dubbed portion.
Simple Programmable Edit (The edit remote control is optional)
Simple programmable edit allows you to program your camcorder to select the scenes
you want to copy from a pre-recorded tape. Use the edit remote control (optional) to
easily copy scenes from a recorded tape in the camcorder (playback machine) onto a
blank tape in a table-top VCR which handles infrared signals (recording machine).
Note: Only the VM-RM20EDA edit remote control (optional) can be used with this
camcorder.
Note: Some VCRs cannot be operated by the edit remote control (optional).
Example of Programmable Editing
Programming the Remote Control for the VCR
It is necessary to program the edit remote control to match the VCR before starting
editing.
Hide quick links:
Advertisement
Table of Contents
