Using Audio/ Video Dubbing - Hitachi VM-E455LA Instruction Manual

Advanced Techniques
marked * in the figure below.
Note: The edit remote control cannot be used unless it is connected to the camcorder.
(1) ( Play) Button
Use to playback recorded tape.
(2) (Rewind) Button
Use this button to fast rewind tapes or for visual search.
(3) A/V DUB Button Use this button to record new audio and video over existing audio and video. See "Using
Audio /Video Dubbing" on page 54.
(4) (Stop) Button
Use this button to stop playback, fast forward, or rewind.
(5) DISPLAY Button
Use this button to select the viewfinder or LCD monitor and TV display.
(6) (Fast Forward) Button
Use this button to fast forward tapes or for visual search.
(7) (Pause/Record) Button
In CAM mode, press this button to start recording. When pressed a second time the camcorder pauses. During
playback use this button to stop the tape temporarily. Pressing a second time resumes normal playback.
(8) COUNTER RESET Button
Use this button to reset the linear time counter to "0:00:00".
This button can always reset the displayed time to "0:00:00", which is helpful when you are using the counter
memory function. See "Using Memory" on page 46.
(9) TITLE ON/OFF Button
Use this button to create or record a title.
If you press this button during playback and recording, the selected or created title will appear. Pressing the
button again switches off the title.

Using Audio/ Video Dubbing

Use audio/video dubbing to record audio and video from the camcorder's built-in microphone and camera onto a
58