Identification And Operation Of Controls - Hitachi VM-1700A Instruction Manual

IDENTIFICATION AND OPERATION OF CONTROLS

IDENTIFICATION AND OPERATION OF CONTROLS
Diagram of camera
Camera Light (only for VM-2700A)
When the "POWER" switch is in the "CAM" position, the camera light is turned on and
off automatically or manually in the record and record/pause modes depending on the
position of "LIGHT" switch. Turn the camera light off after use.
NOTE: The camera light turns on only in the record and record/pause modes.
Microphone
Sensitive to sounds coming from the direction in which the camera is pointed.
Lens (with Lens Cap)
F1.8 (5 ~ 60 mm) 12:1 power zoom lens features auto focus and auto iris functions.
"LIGHT" Switch (for VM-2700A)
When this switch is set to "AUTO", the camera light turns on or off automatically
according to the brightness of the object. When the switch is set to "ON", the camera
light turns on. Set the switch to "OFF" to turn the light off manually.
Electronic Viewfinder (EVF)
Displays what the camera/recorder lens sees. The electronic viewfinder also functions
as a convenient black-and-white monitor during playback of recorded material.
"RF DC OUT" Jack
Connect the RF converter unit (optional) to this jack.
"AUDIO/VIDEO" Jacks
Connect the video/audio cord (not provided) to these jacks and to the audio and video
inputs of your TV/monitor receiver. You can also connect the RF converter unit
(optional) to these jacks and your TV receiver.
To open the cover:
25