Hitachi VM-1700A Instruction Manual page 22

MAKING A SAMPLE RECORDING
5. Now, press "REC/PAUSE" button to start shooting the picture. The "REC" indication
appears in the viewfinder and you are now recording the picture you see through the
viewfinder.
6. Press "REC/PAUSE" button to stop recording. Press the button again to resume
recording. The "
camera/recorder is in the record/pause (stand-by) mode.
NOTES:
• The "TAPE END" indication starts flashing in the viewfinder when there is about five
minutes recording time left on the cassette.
• If the record/pause mode continues for more than 5 minutes, the camera/recorder's power
is automatically turned off. To turn on again, press "REC/PAUSE" button. The
camera/recorder enters record/pause (stand-by) mode.
7. After recording, press and hold the small button on the "POWER" switch, and then
slide it to "VIDEO". The camera/recorder will now be in the stop mode.
" indication will appear in the viewfinder instead of "REC" while the
22