Table of Contents
Advertisement
Basic Operation
Answering calls
Visitor presses
the "Call" button
on the camera
■
When you press the "Handsfree" button and communicate with your visitor for more than 2 minutes, the
monitor will turn off automatically. To resume your communication, re-press the "handsfree" button.
■
When the visitor presses the "Call" button on the camera, the monitor will turn on showing you the
visitors picture, if the call is unanswered within 60 seconds, the monitor will auto turn off.
Monitoring outdoors
Adjusting volume and brightness
■
Use the control dials located on the bottom of the monitor to adjust the brightness or volume levels.
Panic and Door lock buttons
■
PANIC BUTTON
Pressing and holding down the panic button will emit a loud alarm from the outside camera as a
deterrent to unwanted visitors.
■
DOOR LOCK BUTTON
If you have installed the door-lock feature, you can unlock the door by pressing the unlock button.
8
The picture of your visitor
is displayed on the monitor
screen
Press the "Call/
Monitor" button
Press the "Handsfree" button
on your monitor to initiate your
conversation. Next press the
"Unlock" button to have the
door automatically open.
You can view what
is going outside for
approx. 60 seconds
Advertisement
Table of Contents
