Tm Tm; Tm / Vista Tm 64-Bit / Xp; Xp 64-Bit Without Raid Functions; Installing Windows ® Xp / Xp 64-Bit Without Raid Functions - ASROCK A55iCafe User Manual

2.15 Installing Windows

XP 64-bit Without RAID Functions

If you want to install Windows
bit OS on your SATA / SATAII HDDs without RAID functions, please follow below
procedures according to the OS you install.
2.15.1 Installing Windows
If you want to install Windows
RAID functions, please follow below steps.
Using SATA / SATAII HDDs with NCQ and Hot Plug functions (AHCI mode)
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
Configuration.
B. Set the "SATA Mode" option to [AHCI].
STEP 2: Make a SATA / SATAII Driver Diskette.
Make a SATA / SATAII driver diskette by following section 2.14.1 step 2 on page 33.
STEP 3: Install Windows
You can start to install Windows
ginning of Windows
prompted, insert the SATA / SATAII driver diskette containing the AMD AHCI driver.
After reading the floppy disk, the driver will be presented. Select the driver to install
according to the OS you install.
Using SATA / SATAII HDDs without NCQ and Hot Plug functions (IDE mode)
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
Configuration.
B. Set the "SATA Mode" option to [IDE].
STEP 2: Install Windows
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
XP / XP 64-bit Without RAID Functions
®
XP / XP 64-bit on your SATA / SATAII HDDs without
®
XP / XP 64-bit OS on your system.
®
XP / XP 64-bit OS on your system. At the be-
®
setup, press F6 to install a third-party AHCI driver. When
®
XP / XP 64-bit OS on your system.
TM
/ Vista
TM TM
/ Vista
Advanced screen
Advanced screen
35
TM
64-bit / XP /
64-bit / XP / XP 64-
Storage
Storage