ASROCK N68-GS4 FX User Manual page 39

Memory Timing
BIOS SETUP UTILITY
OC Tweaker
Memory Timing
[Disabled]
Power Down Enable
[Auto]
Bank Interleaving
Channel Interleaving [Hash 2]
CAS Latency (CL) [Auto]
[Auto]
TRCD
TRP [Auto]
TRAS [Auto]
Command Rate [Auto]
TRC [Auto]
[Auto]
TRTP
TWR [Auto]
[Auto]
TRFC
TRRD [Auto]
TWTR [Auto]
TRTP [Auto]
TFAW [Auto]
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Power Down Enable
Use this item to enable or disable DDR power down mode.
Bank Interleaving
Interleaving allows memory accesses to be spread out over banks on the
same node, or accross nodes, decreasing access contention.
Channel Interleaving
This allows you to enable Channel Memory Interleaving. The default value
is [Hash 2].
CAS Latency (CL)
Use this item to adjust the means of memory accessing. The default value
is [Auto].
TRCD
Use this to adjust TRCD values. The default value is [Auto].
TRP
Use this to adjust TRP values. The default value is [Auto].
TRAS
Use this to adjust TRAS values. The default value is [Auto].
Command Rate
Use this item to change Command Rate Auto/Manual setting. Min: 1N.
Max: 2N. The default is [Auto].
TRC
Use this to adjust TRC values. The default value is [Auto].
TRTP
Use this to adjust TRTP values. The default value is [Auto].
TWR
Use this to adjust TWR values. The default value is [Auto].
TRFC
Use this to adjust TRFC values. The default value is [Auto].
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
3 9 3 9 3 9 3 9 3 9