I/O Panel (N68-Gs4 Fx) - ASROCK N68-GS4 FX User Manual

1.5 I/O P 1.5 I/O Panel (N68- 1.5 I/O P anel (N68- anel (N68- anel (N68- GS4 FX)
1.5 I/O P 1.5 I/O P anel (N68-
1
10 9
1 PS/2 Mouse Port (Green)
* 2 RJ-45 Port
3 Line In (Light Blue)
4 Front Speaker (Lime)
5 Microphone (Pink)
* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED
indications.
LAN Port LED Indications
Activity/Link LED
Status Description
Off No Activity
Blinking Data Activity
To enable Multi-Streaming function, you need to connect a front panel audio cable to the front
panel audio header. Please refer to below steps for the software setting of Multi-Streaming.
®
For Windows XP:
After restarting your computer, you will find "Mixer" tool on your system. Please select "Mixer
ToolBox" , click "Enable playback multi-streaming", and click "ok". Choose "2CH" or
"4CH" and then you are allowed to select "Realtek HDA Primary output" to use Rear Speaker
and Front Speaker, or select "Realtek HDA Audio 2nd output" to use front panel audio. Then
reboot your system.
® TM
For Windows 8 / 7 / Vista
After restarting your computer, please double-click "Realtek HD Audio Manager" on the
system tray. Set "Speaker Configuration" to "Quadraphonic" or "Stereo". Click "Device
advanced settings", choose "Make front and rear output devices playbacks two different audio
streams simultaneously", and click "ok". Then reboot your system.
GS4 FX) GS4 FX) GS4 FX)
GS4 FX)
8
6 USB 2.0 Ports (USB01)
7 USB 2.0 Ports (USB23)
8 D-Sub Port
9 COM Port
10 PS/2 Keyboard Port (Purple)
SPEED LED
Status Description
Off 10Mbps connection
Orange 100Mbps connection
Green 1Gbps connection
:
1 2 1 2 1 2 1 2 1 2
2
3
4
5
7 6
ACT/LINK SPEED
LED LED
LAN Port